1500 W Watt 12 V DC 3 Blades Wind Turbine Generator System

Description

150
0W 12V DC Wind Turbine Generator
Body Material
Aluminium
Rotor Diameter
120cm (47 inches)
Starting Wind Speed
3m/s (7 mph)
Rated Wind Speed
12.5m/s
Survival Wind Speed
45m/s
Voltage
12V DC
Rated Power
1000W
Maximum Power
1500W
Weight
7.5kg
Mount
1.5 in schedule 40 pipe 1.9 in (48 mm) outer diameter
Blade Specification:
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
59.7cm (23.5 inches)
Width (base)
12.7cm (5 inches )
Weight (per blade)
166g, 6oz
Features:
- Incorporates highly efficient, true airfoil
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
Nose Cone Specification:
Material
Plastic
Diameter
140 mm
Height
90mm
Mounting
Locks on Hub
Thickness
3mm
Weight
80g
Features:
- Reduce wind resistance
- Eliminates vortexes
- Greater stability
- Neighbor Friendly
Package Includes:
Wind turbine Generator, Nose Cone, 3 turbine blades, Hub, all screw & bolts
Certification: CE, RoHS and ISO 9001:2000
Environment friendly~
Environment friendly~
Installation Reference - not to scale - for reference only
(Inverters, batteries, controller, solar panels are not included in this listing. )
Connection Overview:
The Wind Generator will generate AC power and is able to charge 12V batteries with a rectifier. Note: the 12V Batteries above are not included.
If your home or farm is connected to the power grid, on windier days you may be able to sell excess power generated by your wind turbine to your utility. At other times when the turbine cannot generate all the power you need, you would buy power from the grid. This concept is called net metering.
Even if net metering is unavailable, you might be able to reduce your power bills by using the electricity generated by wind turbines, and become less dependent on your utility.
Since wind speed increases with height, increases to the tower height can mean enormous increases in the amount of electricity generated by a wind turbine.
Generator Specification:
Our's
- Aluminum Body, Durable and Long Lasting
- Unlike rubber, PVC Rings are much more durable will not harden and crack and cause leaks
- Bearing are covered and will not rust / leak
Competitor's
-
Plastic Body
, becomes brittle under the Sun's UV Ray
- Rubber ring will harden after approximately 1 year of use and will start cracking and leaking
- Bearing are exposed and will rust / leak
Body Material
Aluminium
Rotor Diameter
120cm (47 inches)
Starting Wind Speed
3m/s (7 mph)
Rated Wind Speed
12.5m/s
Survival Wind Speed
45m/s
Voltage
12V DC
Rated Power
600W
Maximum Power
800W
Weight
7.5kg
Mount
1.5 in schedule 40 pipe 1.9 in (48 mm) outer diameter
Blade Specification:
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
59.7cm (23.5 inches)
Width (base)
12.7cm (5inches )
Weight (per blade)
166g, 6oz
Features:
- Incorporates highly efficient, true airfoil
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
Adjustable blade degree with included degree adjusters (Shims)
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
Below are comparisons between the our blades and competitor's blades
Hub Specification:
Pros
-
140mm
diameter, 10% larger than competitor's
- High blade capacity, allow up to
6
to be installed
- Covers the entire face plate to eliminate vortex
Cons
- 125mm in diameter
- Only allows 3 blades to be installed
- Does not cover face plate completely
Material
Aluminum (with coating)
Diameter
140 mm
Capacity
6 Blades
Compatibility
Air-X, 403, 303
Shaft Diameter
for 17mm shaft
Disc Thickness
23mm
Mounting Specification:
Ours
-
Dual Metal ball bearing
to prevent vertical vibration
- Yaw shaft diameter: 40mm
- 3cm of stabilizing distance with 2 bearings
- No vibration = Increase in efficiency
- Reduction in noise output
- One piece design Yaw body provides more stability
Competitor's
- Single bearings will not eliminate vertical vibration
- Yaw shaft diameter: 35mm
- Stabilizing distance effectively shorten to 1.4cm with one bearing (53% reduction)
- Vibration will cause bearing to grind on yaw shaft and create a bigger play, which in turn will cause more vibration in a never ending cycle
- 2 pieces design Yaw body is less stable
Nose Cone Specification:
Material
Plastic
Diameter
140 mm
Height
90mm
Mounting
Locks on Hub
Thickness
3mm
Weight
80g
Features:
- Reduce wind resistance
- Eliminates vortexes
- Greater stability
- Neighbor Friendly
Performance Comparison:
With Nose Cone
- Smooth Performance
Without Nose Cone
- Air current spins into tiny vortexes
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE
Terms & Conditions
Bidding this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
Payment
Total payment = winning price + shipping & handling
Insufficient payment will be charge extra US{{detail_product_description}}.50 to compensate the Paypal penalty fees.
Shipping
&
Handling
Total shipping = Base S&H + Combine S&H ( for each additional item )
a) Base S&H is the highest shipping cost of the first item.
1. Combine shipments are only available on the condition of a
SINGLE PAYMENT
. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
2. We ship within 2 working days after payment is received and confirmed. Please allow up to
5-10 BUSINESS DAYS
for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
4. We are not responsible for any loses or damages resulting from shipping.
Return & Refund Policy
No refunds after 30 days
Shipping & handling & other service fees are
NOT
refundable
All returned items must be in original packing.
Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
A 20% restocking fee will be charged on all refunded items.
E-mails
E-mails are usually answered within 2~3 business days in priority order.
Spams and mass e-mailing will be deleted without slightest glance.
E-mails with virus or anything subjected to hacking are automatically deleted.