500W DC12V/24V Automatic Switch Wind-driven Generator Controller Regulator W0J3

Description

This controller can control the wind-driven generator to automatically the . the use of limiting current limiting voltage control to ensure the finest chargingeffect, and provide the maximum protections to fans and at the same . Reverse protections circuit, do not need to replace the fuse, as long as the positive and negative polarity can be re-connected, which makes the whole system to run more reliable. indicator light to indicate the working condition of the circuit, simple, intuitive and clear. You can have a try.
Features:
The controller can control the wind-driven generator to automatically the .
the use of limiting current limiting voltage control to ensure the finest chargingeffect, and provide the maximum protections to fans and at the same .
Reverse protections circuit, do not need to replace the fuse, as long as the positive and negative polarity can be re-connected, which makes the whole system to run more reliable.
indicator light to indicate the working condition of the circuit, simple, intuitive and clear.
Efficient modular design, making the performance of the entire system to be the maximum protected.
The rectification and brake circuit part of the controller adopts integrated module design, the heat radiation and the reliability is finner than common product.
Comprehensive waterproof protections, IPX7 waterproof design for provides long service .
Usage:
The three green line connected windturbines (manual brake).
The red and black lines connect to the positive and negative poles of the .
Note:
1. Confirm that the output voltage of the windturbine is consistent with the rated voltage of the .
2. Please carefully follow the instructions required to connect the and windturbines to the controller, the reverse polarity or the wrong position will cause the system to work abnormally, and may even cause damage to the system .
3. Although this controller has taken precautions against possible contingencies, it is strongly recommended that users strictly follow the operating procedures to prevents huge damage to the and the controller.
Specifications:
Name: Wind Generator Controller
Material: plastics + component
Colour: black
: 500W
voltage: /24V
Woking temperature: -35℃ to 75℃
Display:
Item size: 100 * 130 * 40mm / 3.94 * 5.12 * 1.57in
Package size: 110 * 140 * 50mm / 4.33 * 5.51 * 1.97in
Package weight: 300g / 10.58ounce
Packing List:
1 * Wind-driven Generator Controller