Apollo 550W-1000W Wind Turbine Generator 12V-24V 3-6 Blades+Controller

Description

Wind Generator
Please choose one Wind Generator from the model menu
Discounted
Price Overview:
Apollo 550W 12V DC
3 Blades
Apollo 650W 12V-24V AC
6 Blades
Apollo 800W 12V-24V AC
6 Blades
Apollo 1000W 12V- 24V AC
6 Blades
1000W Dumpload
12 / 24V
Wind Charge Controller
12V Or 24V
Nylon Blades
6 x 29" (740mm)
Nylon Blades
3 x 23.5" (600mm)
Below are Details for each model:
Apollo 550W
12V DC ( 3 Blades)
Wind Turbine
for Land or
Marine
Use
Product designed in Canada
Introduction
Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. However, wind turbines that are available for homeowners in the market today are mostly designed (or copied) a decade ago and although they work, most have mechanical flaws that were neglected since their debut and there is a lot of room for improvements. With that in mind, we have redesigned a new wind turbine - the Apollo. Built-in with a stronger alternator for higher power output, Anti-vibration system to increase power efficiency, and the ability to be customized and upgraded for the future.
Exploded View
(No inverter, batteries, turbines and solar panels included in this listing)
What is the difference in an
Apollo
Wind Turbine?
GreenergyStar's Apollo Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other
GreenergyStar branded
products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features:
I. Performance
Curves
The above battery charging power curve is obtained from charging a 12V 100Ah battery bank with
our
SolarWind Hybrid Charge Controller
(not included in this listing)
Installation Reference - not to scale - for reference only
(Inverters, batteries, controller, solar panels are not included in this listing. )
Blade Features
- Color: White
- With 49" swept area when mounted on a 5" Hub
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Can generate 800 watts or more depending on PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjusters / shims (see picture below)
- High resistance to bending (over 150 degrees)
What is Nylon 6.6?
Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.
Nylon is extremely versatile in its applications. It is highly resistant to
abrasion
and has excellent
resilience
.
Within nylon, there are two groups:
nylon 6
and
nylon 6.6
. Nylon 6.6 is the
premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the
flexural strength,
low-temperature toughness, UV Resistance
and is the most
resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Adjustable blade degree with included degree adjusters (Shims)
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
Nylon Blades Specification
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
23.5 inches
Width (base)
5 inches
Mounting
6mm bolts
Weight (per blade)
166g, 6oz
Rotor Feature
Apollo
Competitor's
Pros
-
20mm
rotor thickness, 66% more compare to competitor's
- Stronger Magnetic flux due to thicker rotor, and thus, more Power
- Evenly spread magnets decrease magnetic drag
- 6 balanced hole to reduce weight
- Reduce forces required to start rotor due to less reciprocation mass
- Brushless
Permanent Magnet Alternator
Cons
- only 12mm in rotor thickness and thus weaker magnetic flux
- Magnets are not evenly spread out (ie: screw at top)
- No weight reduction = harder start up
Rotor Specification
Rotor Diameter
77mm
Magnet Material
Rare Earth Neodymium magnets
Number of Magnets
12
Magnet Width (Rotor thickness)
20mm
Weight
682g
Body Specification
Material
Aluminum (with coating)
Length
62 cm
Tail Height
33 cm
Tail surface Area
225 cm^2
Upgradable with 29" blades
Yes
Blades allowed
6
Hub Specification
Pros
-
140mm
diameter, 10% larger than competitor's
- High blade capacity, allow up to
6
to be installed
- Covers the entire face plate to eliminate vortex
Cons
- 125mm in diameter
- Only allows 3 blades to be installed
- Does not cover face plate completely
Material
Aluminum (with coating)
Diameter
140 mm
Capacity
6 Blades
Compatibility
Air-X, 403, 303
Shaft Diameter
for 17mm shaft
Disc Thickness
23mm
II. Anti-Vibration System
Horizontal
Apollo
Competitor's
Pros
-
Dual Metal ball bearing
located
at
front
and
rear
of rotor
- 5.5cm of stabilizing distance to prevent
rotor and blades from vibrating
- No vibration = Increase in efficiency
- Reduction in noise output
Cons
- 2 bearings placed side by side together
- Stabilizing distance effectively
shorten to 2cm (63% reduction)
- Vibration = Energy wasted
- Wasted energy gets converted to Noise and Heat
Vertical
Apollo
Competitor's
Pros
-
Dual Metal ball bearing
to prevent vertical vibration
- Yaw shaft diameter: 40mm
- 3cm of stabilizing distance with 2 bearings
- No vibration = Increase in efficiency
- Reduction in noise output
- One piece design Yaw body provides more stability
Cons
- Single bearings will not eliminate vertical vibration
- Yaw shaft diameter: 35mm
- Stabilizing distance effectively shorten to 1.4cm with one bearing (53% reduction)
- Vibration will cause bearing to grind on yaw shaft and create a bigger play, which in turn will cause more vibration in a never ending cycle
- 2 pieces design Yaw body is less stable
III. Anti-Leak System
Apollo
Competitor's
Pros
- Unlike rubber, PVC Rings are much more durable will not harden and crack and cause leaks
- Bearing are covered and will not rust / leak
Cons
- Rubber ring will harden after approximately 1 year of use and will start cracking and leaking
- Bearing are exposed and will rust / leak
IV. Generator Specification
Body Material
Aluminum
Rotor Diameter
124.5cm (49 inches)
Starting Wind Speed
3.5m/s (8 mph)
Rated Wind Speed
13m/s
Survival Wind Speed
45m/s
Voltage
12 V DC
Rated Power
450W
Maximum Power
550W
Weight
7.88kg (17.39 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
What are included:
-1 Apollo Wind Turbine
- 3x Blades
- Hub with 6 lots
- Nose Cone
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
Apollo 650W
12V-24V AC
( 6 Blades )
Wind Turbine
for Land or
Marine
Use
Product designed in Canada
I. Performance
225A Slip Ring
For those who are serious about wind power generation, this is a must have item. Never again will the cable get twisted up. Never again will you have to climb up the ladder and fix the tangles. Get a slip ring today and you can put all of that behind you.
Slip Ring Specification:
Circuits
3
Voltage
380VAC/DC
Maximum Current
75A X3
Rated Current
50A X3
Working Speed
250RPM
Temperature
-40'C to 100'C
Wire Gauge
6AWG
Number of bearings
2
Thread
M22x1.5
22mm diameter
1.5mm Thread Pitch
Features:
- High voltage / current carrying capacity
- Copper-graphite brushes ensure long life even under extreme load conditions
- Quick connector for fast connection to the AC / DC wind turbine *see reference picture below*
- Insulated with fiberglass sleeves to protect wires to the wind turbine and make the installation professional and tidy
- Easily taken apart for quick maintenance
- 2x High Quality Metal Sealed Ball bearing to stabilize axle
Exploded View
Connection Overview
As we can see from the exploded view, the top circuit is color coded
Red
, the middle circuit is
Black
and the bottom circuit is
Blue
.
Curves
The above battery charging power curve is obtained from charging a 12V 100Ah battery bank with
our
SolarWind Hybrid Charge Controller
(not included in this listing)
II. Anti-Vibration System [Same as above]
III. Anti-Leak System [Same as above]
IV. Generator Specification
Body Material
Aluminum
Rotor Diameter
124.5cm (49 inches)
Starting Wind Speed
(6 blades)
3.0m/s (7 mph)
Rated Wind Speed
13m/s
Survival Wind Speed
45m/s
Voltage
12 V-24V AC
Rated Power
550W
Maximum Power
650W
Weight
8.28kg (18.25 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
What are included:
-1 Apollo Wind Turbine
- 6x Blades
- Hub with 6 lots
- Nose Cone
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
Apollo 800W
12V-24V AC (6 Blades)
Wind Turbine
for Land or
Marine
Use
Product designed in Canada
I. Performance
Curves
The above battery charging power curve is obtained from charging a 12V 100Ah battery bank with our
SolarWind Hybrid Charge Controller
.
(not included in this listing)
II. Anti-Vibration System [Same as above]
III. Anti-Leak System [Same as above]
IV. Generator Specification
Body Material
Aluminum
Rotor Diameter
152.4cm (60 inches)
Starting Wind Speed
3.0m/s (7 mph)
Rated Wind Speed
13m/s
Survival Wind Speed
45m/s
Voltage
12 V-24V AC
Rated Power
700W
Maximum Power
800W
Weight
8.8kg (19.4 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
What are included:
Apollo 29" Extended Blades and Tail Extension included for the 800W Model
-1 Apollo Wind Turbine
- 6x Blades
- Hub with 6 lots
- Nose Cone
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
Apollo 1000W
12V-24V AC ( 6 Blades )
Wind Turbine
for Land or
Marine
Use
Product designed in Canada
I. Performance
Curves
The above battery charging power curve is obtained from charging a 12V 100Ah battery bank with
our
SolarWind Hybrid Charge Controller
(not included in this listing)
Blade Features
- Color: White
- With 60" swept area when mounted on a 5" Hub
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Can generate 1000 watts or more depending on PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjusters / shims (see picture below)
- High resistance to bending (over 150 degrees)
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
29 inches
Width (base)
6 inches
Mounting
6mm bolts
Weight (per blade)
340g, 12oz
Rotor Specification
Apollo
Competitor's
Pros
-
30mm
rotor thickness, 150% more compare to competitor's
- Stronger Magnetic flux due to thicker rotor, and thus, more Power
- Evenly spread magnets decrease magnetic drag
- 6 balanced hole to reduce weight
- Reduce forces required to start rotor due to less reciprocation mass
- Brushless
Permanent Magnet Alternator
Cons
- only 12mm in rotor thickness and thus weaker magnetic flux
- Magnets are not evenly spread out (ie: screw at top)
- No weight reduction = harder start up
Body Specification
Rotor Diameter
77mm
Magnet Material
Rare Earth Neodymium magnets
Number of Magnets
12
Magnet Width (Rotor thickness)
30mm
Weight
1.34kg
Reference picture ONLY.
Please refer to listing details on the actual model you are getting.
- Bigger body allow fitting of a more powerful alternator than competitor's
- Longer body and tail (62cm) allow the Apollo to face wind even if more blades are added while our competitor just spins round and round
- High surface area tail, 33cm in height, 30% more surface area will let the turbine stay focus to incoming wind
- Installation of 29" blades and capture 50% more wind is now possible
II. Anti-Vibration System [Same as above]
III. Anti-Leak System [Same as above]
IV. Generator Specification
Body Material
Aluminum
Rotor Diameter
152.4cm (60 inches)
Starting Wind Speed
3.0m/s (7 mph)
Rated Wind Speed
13m/s
Survival Wind Speed
45m/s
Voltage
12 V-24V AC
Rated Power
900W
Maximum Power
1000W
Weight
9.3kg (20.5 lb)
Yaw Body / Tower Mount
Inner Diameter
53.3mm, 2.1 inch
Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding
What are included:
Apollo 29" Extended Blades and Tail Extension included for the 1000W Model
-1 Apollo Wind Turbine
- 6x Blades
- Hub with 6 lots
- Nose Cone
- Screws and Nuts
- Degree Adjuster
- Allen Key
- Instruction Manual
GreenergyStar
Dump Load
for 12V & 24V Wind Turbines
Product designed in Canada
Why do we need a Dump Load?
As we all know, wind turbines are designed to operate in a loaded situation so it can generate power to either the battery / the grid. It is, however, not designed to operate under a no load (open circuit) situation because doing so will put a lot of strain on the wind turbine components and speeds out the wear out process which will eventually will lead the turbine to self destruct. Therefore, a dump load is required to burn out the extra energy when the battery is full OR when the grid is out. Because of this, a dump load is also known as a "diversion load".
This dump load is designed to work with GreenergyStar SolarWind Hybrid RX Charge Controller. It will work with the Apollo & Patriot Wind Turbines as well.
Features
- Specifically designed to work with GreenergyStar SolarWind Hybrid RX Charge Controller
- Switch between 12V / 24V system
- 2 fans active convection cooling system
- LED to indicate if dump load is active
- Finned case to efficiently dissipate heat
- Consist of 4 high quality golden low temperature resistor
Dump Load Interior - High Quality golden low temperature resistor
Specification
Input Voltage
12V and 24 V switchable
Maximum Aperage
15A
Continuous Load
500W
Peak Load
1000W
Operating Temperature Range
-25'C ~ 80'C
Weight
1094g, 2.41lb
Dimension (L x W x H)
19.3 x 13.1 x 6.9 cm
7.5" x 5.2" x 2.7"
Mounting
Wall Mount at base
Cooling
2 fans convection cooling
Casing
High quality finned aluminum to act as heat sink for fast heat dissipation
LED Indicatior
RED, turns on when dumpload is active
Green
ergyStar
12V or 24V
Wind Turbine Charge Controller
Features:
GreenergyStar Apollo, Patriot, WindZilla Phoenix and MegaShark wind turbines
Compatible with GreenergyStar branded grid-tie inverters
System Voltage: 12V or 24V Nominal
Microprocessor based control electronics to control charging, outputs and dump load
Intuitive LED Display to reflect system status
Keeps battery in an optimum charged state
High quality finned aluminum casing to protect the interior and dissipate heat
Warning: Controller will get
damaged
if polarity of battery is incorrect, Dump Load must be connected at all times
Protection Features:
Dump Load MUST be connected at all time to protect the charge controller, no dump load = no warranty
Requires a minimum of 1.2Ohm 600W
resistive load
to be connected to the dump load terminal
Dump load activates when AC Turbine is >= 35V
Activating dump load will slow down the AC turbine and reduce voltage spikes.
Over voltage protection: All outputs will be cut when input voltage is over 30V. However dump load will stay on.
The
DUMMY
LED will turn
Red
when the dump load has been activated
Mechanical Specifications:
Operating temperature range
-25'C - 80'C
Weight
610g
1.35lb
Dimension (L x W x H)
15.1 x 13.1 x 6.9 cm
6.0 " x 5.2" x 2.7"
Mounting
Wall Mount at base
Cooling
Passive
Casing
High quality finned aluminum to act as heat sink for fast heat dissipation
Maximum Amperage on Terminals
DUMP LOAD: 28A
LOAD: 10A
BATTERY: 15A
6 x 29" Nylon 6.6 Wind Turbine Generator Blades
For Air-X, 403, 303 Ametek, Apollo
(Wind turbine not included)
Brand new~
Environment friendly~
Nylon Blade Specifications:
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
29 inches
Width (base)
6 inches
Compatibility
Car alternators, AMETEK, tape drive, stepping, 90 VDC motors
Mounting
6mm bolts
Weight (per blade)
300g, 0.66lbs
Accessories:
-6 Degree Adjusters
-Twelve M6x25 Stainless Steel bolts
- Twelve hex Nylocks nuts (auto locks thread)
What is Nylon 6.6?
Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.
Nylon is extremely versatile in its applications. It is highly resistant to
abrasion
and has excellent
resilience
.
Within nylon, there are two groups:
nylon 6
and
nylon 6.6
. Nylon 6.6 is the
premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the
flexural strength
,
low-temperature toughness
and is the most
resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Features:
- 29" inches long, longest in the market
- About 64" swept area when mounted on a 5.5" rotor
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Super slim, spins up to 1500RPM
- Can generate 800 watts or more depending on your PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjuster (see picture)
- 17mm hub centers fits on most car alternators, AMETEK, tape drive, stepping, 90VDC motors(NO HUBS INCLUDED)
- Slight metal work required for 5/8" shafts
- Excellent for PMA's Permanent Magnet Alternators
- 7 inches longer and 1.5 inches wider than factory blades
- Replace / Upgrade your wind turbine blades
- High resistance to bending (over 150 degrees)
Adjustable blade degree with included degree adjuster
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
Please note this enhancement is only available from us. The so-called "defect" our competitor has claim is completely false and proves his ignorance in mechanical engineering.
Below are comparisons between the our blades and competitor's blades
3x 23.5" Nylon 6.6 Wind Turbine Generator Blades
For Air-X 403, 303, Ametek, Apollo
(Wind turbine not included)
Brand new~
Environment friendly~
Nylon Blade Specifications:
Material
Nylon 6.6 + Carbon Fiber (<20%)
Length
23.5 inches
Width (base)
5 inches
Compatibility
Car alternators, AMETEK, tape drive, stepping, 90 VDC motors
Mounting
6mm bolts
Weight (per blade)
160g, 5.9oz
Accessories:
-3 Degree Adjusters
- Six M6x25 Stainless Steel bolts
- Six hex Nylocks nuts (auto locks thread)
What is Nylon 6.6?
Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon. Of the three types, nylon is by far the better choice.
Nylon is extremely versatile in its applications. It is highly resistant to
abrasion
and has excellent
resilience
.
Within nylon, there are two groups:
nylon 6
and
nylon 6.6
. Nylon 6.6 is the
premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the
flexural strength
,
low-temperature toughness
and is the most
resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Features:
- 23.5" inches long, longest in the market
- About 53" swept area when mounted on a 5.5" rotor
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Super slim, spins up to 1500RPM
- Can generate 800 watts or more depending on your PMA efficiency
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- Adjustable blade degree with included degree adjuster (see picture)
- 17mm hub centers fits on most car alternators, AMETEK, tape drive, stepping, 90VDC motors(NO HUBS INCLUDED)
- Slight metal work required for 5/8" shafts
- Excellent for PMA's Permanent Magnet Alternators
- Replace / Upgrade your wind turbine blades
- High resistance to bending (over 150 degrees)
Accessories Pack:
For Air-X 403, 303, Ametek, Apollo
-3 Degree Adjusters
- Six M6x25 Stainless Steel bolts
- Six hex Nylocks nuts (auto locks thread)
- in case the original set is misplaced
Degree Adjusters to fine tune blade angle
Increase/decrease blade angle by installing degree adjuster under the blades
"+" on the right side = Increase angle =
More
Torque, Less Speed
"-" on the right side = Decrease angle = Less Torque,
More
Speed
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products.
Warranty:
We will warrant this unit against any manufacture defects or workmanship for 6 months from the date of purchase. This limited warranty specifically excludes damage caused by
improper installation, accident, misuse
,
abuse
,
improper
storage
, or
any unauthorized disassembly, repair, or modification
.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE
Terms & Conditions
Bidding this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors.
Payment
Total payment = winning price + shipping & handling
Insufficient payment will be charge extra US{{detail_product_description}}.50 to compensate the Paypal penalty fees.
Shipping
&
Handling
Total shipping = Base S&H + Combine S&H ( for each additional item )
a) Base S&H is the highest shipping cost of the first item.
Extended Area Surcharg
e:
For Address that our couriers determined to be outside of their normal service area, they will charge an additional "extended area surcharge". Minimum is
US.99
, we will notify you if it is higher.
1. Combine shipments are only available on the condition of a
SINGLE PAYMENT
. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
2. We ship within 2 working days after payment is received and confirmed. Please allow up to
5-10 BUSINESS DAYS
for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
4. We are not responsible for any loses or damages resulting from shipping.
Return & Refund Policy
No refunds after 30 days
Shipping & handling & other service fees are
NOT
refundable
All returned items must be in original packing.
Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
A 20% restocking fee will be charged on all refunded items.
E-mails
E-mails are usually answered within 2~3 business days in priority order.
Spams and mass e-mailing will be deleted without slightest glance.
E-mails with virus or anything subjected to hacking are automatically deleted.