Flexcharge PRGTMR12V Real Time Programmable Digital Timer 12V

Description

Flexcharge PRGTMR12V Real Time Programmable Digital Timer 12V
Flexcharge
Real Time Programmable
Digital Timer
Model: PRGTMR12V
US Manufactured Long Service Life and Performance History
We are a stocking Flexcharge dealer listed on SES Flexcharge's dealer page.
The following is copyrighted by SES Flexcharge:
The
Flexcharge™
Real Time Programmable Timer
is a 24 hr, 8 event ON 8 event OFF, clock based programmable 8A load controller.  Multiple Load ON and OFF times are programmed into this real time clock controller.  Each day can be programmed with its own unique timing pattern.  Eight  ON and eight OFF events can be programmed independently.  Example;  Use one ON event to  have a light come on at 7pm every day then use seven different OFF events to turn the light OFF at a different time each day.  This controller may be used in conjunction with the Flexcharge NCxxLxx or Night Watchman to have the load come ON at dusk, then shut OFF at a pre-programmed time or turn back on before morning and then OFF at dawn.
Features:
Internal battery maintains clock and programmed memory for up to 3 years with no external power. The battery will not operate the timer.
Consumes less than 5mA in standby mode.
Drives up to 8A Inductive Loads (motors or lights with ballasts) or 16A Resistive Loads.
Isolated relay contacts allow user to directly control up to 240Vac Loads
Reverse Polarity Protected.
Manual override allows the user to manually turn the load ON and OFF as desired.
Easy to Use Terminal Block for simple installation.
Easy programming of timer functions.
The clock circuit of the timer must have 12 volts to operate it but the timer will switch any voltage up to 240AC volts.  Because the clock only draws 5mA in standby and 45mA when the load is on, you can operate the timer from a 12 volt battery of the system but then switch any higher higher voltage.  This works well on 24 volt DC systems.  Contact us for additional alternative methods of operating the timer on higher voltages.
The timer is not waterproof so it must be mounted in a protected area.
Operating Voltage
10.5 to 15 volts
Switched voltage
0 to 240 volts
Power consumption
5mA standby, 45mA under load
Internal Battery Life
Up to 3 years.  (CR2032)
Load terminals
One Normally open, One normally closed
Temperature Range
-10C to +60C Temps above or below this range could affect the accuracy of the clock but the timer will still operate.
Dimensions
4 inches by 4 inches by 2 inches including mounting tabs and terminal strip.  6 oz.
Limited Warranty
One year on materials and workmanship
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
Flexcharge Real Time Programmable Digital Timer Model: PRGTMR12V US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. The Flexcharge™ Real Time Programmable Timer is a 24 hr, 8 event ON 8 event OFF, clock based programmable 8A load controller. Multiple Load ON and OFF times are programmed into this real time clock controller. Each day can be programmed with its own unique timing pattern. Eight ON and eight OFF events can be programmed independently. Example; Use one ON event to have a light come on at 7pm every day then use seven different OFF events to turn the light OFF at a different time each day. This controller may be used in conjunction with the Flexcharge NCxxLxx or Night Watchman to have the load come ON at dusk, then shut OFF at a pre-programmed time or turn back on before morning and then OFF at dawn. Features: ---Internal battery maintains clock and programmed memory for up to 3 years with no external power. The battery will not operate the timer. ---Consumes less than 5mA in standby mode. ---Drives up to 8A Inductive Loads (motors or lights with ballasts) or 16A Resistive Loads. ---Isolated relay contacts allow user to directly control up to 240Vac Loads ---Reverse Polarity Protected. ---Manual override allows the user to manually turn the load ON and OFF as desired. ---Easy to Use Terminal Block for simple installation. ---Easy programming of timer functions. The clock circuit of the timer must have 12 volts to operate it but the timer will switch any voltage up to 240AC volts. Because the clock only draws 5mA in standby and 45mA when the load is on, you can operate the timer from a 12 volt battery of the system but then switch any higher higher voltage. This works well on 24 volt DC systems. Contact us for additional alternative methods of operating the timer on higher voltages. The timer is not waterproof so it must be mounted in a protected area Operating Voltage 10.5 to 15 volts Switched voltage 0 to 240 volts Power consumption 5mA standby, 45mA under load Internal Battery Life Up to 3 years. (CR2032) Load terminals One Normally open, One normally closed Temperature Range -10C to +60C Temps above or below this range could affect the accuracy of the clock but the timer will still operate. Dimensions 4 inches by 4 inches by 2 inches including mounting tabs and terminal strip. 6 oz. Limited Warranty One year on materials and workmanship [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=2) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Flexcharge PRGTMR12V | Real Time Programmable Digital Timer 12V
Flexcharge
Real Time Programmable
Digital Timer
Model: PRGTMR12V
US Manufactured Long Service Life and Performance History
We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page:
http://www.flexcharge.com/Where-to-buy.html
The following is copyrighted by SES Flexcharge.
The
Flexcharge™
Real Time Programmable Timer
is a 24 hr, 8 event ON 8 event OFF, clock based programmable 8A load controller.  Multiple Load ON and OFF times are programmed into this real time clock controller.  Each day can be programmed with its own unique timing pattern.  Eight  ON and eight OFF events can be programmed independently.  Example;  Use one ON event to  have a light come on at 7pm every day then use seven different OFF events to turn the light OFF at a different time each day.  This controller may be used in conjunction with the Flexcharge NCxxLxx or Night Watchman to have the load come ON at dusk, then shut OFF at a pre-programmed time or turn back on before morning and then OFF at dawn.
Features:
Internal battery maintains clock and programmed memory for up to 3 years with no external power. The battery will not operate the timer.
Consumes less than 5mA in standby mode.
Drives up to 8A Inductive Loads (motors or lights with ballasts) or 16A Resistive Loads.
Isolated relay contacts allow user to directly control up to 240Vac Loads
Reverse Polarity Protected.
Manual override allows the user to manually turn the load ON and OFF as desired.
Easy to Use Terminal Block for simple installation.
Easy programming of timer functions.
The clock circuit of the timer must have 12 volts to operate it but the timer will switch any voltage up to 240AC volts.  Because the clock only draws 5mA in standby and 45mA when the load is on, you can operate the timer from a 12 volt battery of the system but then switch any higher higher voltage.  This works well on 24 volt DC systems.  Contact us for additional alternative methods of operating the timer on higher voltages.
The timer is not waterproof so it must be mounted in a protected area
Operating Voltage
10.5 to 15 volts
Switched voltage
0 to 240 volts
Power consumption
5mA standby, 45mA under load
Internal Battery Life
Up to 3 years.  (CR2032)
Load terminals
One Normally open, One normally closed
Temperature Range
-10C to +60C Temps above or below this range could affect the accuracy of the clock but the timer will still operate.
Dimensions
4 inches by 4 inches by 2 inches including mounting tabs and terminal strip.  6 oz.
Limited Warranty
One year on materials and workmanship
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
Flexcharge
Real Time Programmable
Digital Timer
Model: PRGTMR12V
US Manufactured Long Service Life and Performance History
We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page:
http://www.flexcharge.com/Where-to-buy.html
The following is copyrighted by SES Flexcharge.
The
Flexcharge™
Real Time Programmable Timer
is a 24 hr, 8 event ON 8 event OFF, clock based programmable 8A load controller.  Multiple Load ON and OFF times are programmed into this real time clock controller.  Each day can be programmed with its own unique timing pattern.  Eight  ON and eight OFF events can be programmed independently.  Example;  Use one ON event to  have a light come on at 7pm every day then use seven different OFF events to turn the light OFF at a different time each day.  This controller may be used in conjunction with the Flexcharge NCxxLxx or Night Watchman to have the load come ON at dusk, then shut OFF at a pre-programmed time or turn back on before morning and then OFF at dawn.
Features:
Internal battery maintains clock and programmed memory for up to 3 years with no external power. The battery will not operate the timer.
Consumes less than 5mA in standby mode.
Drives up to 8A Inductive Loads (motors or lights with ballasts) or 16A Resistive Loads.
Isolated relay contacts allow user to directly control up to 240Vac Loads
Reverse Polarity Protected.
Manual override allows the user to manually turn the load ON and OFF as desired.
Easy to Use Terminal Block for simple installation.
Easy programming of timer functions.
The clock circuit of the timer must have 12 volts to operate it but the timer will switch any voltage up to 240AC volts.  Because the clock only draws 5mA in standby and 45mA when the load is on, you can operate the timer from a 12 volt battery of the system but then switch any higher higher voltage.  This works well on 24 volt DC systems.  Contact us for additional alternative methods of operating the timer on higher voltages.
The timer is not waterproof so it must be mounted in a protected area
Operating Voltage
10.5 to 15 volts
Switched voltage
0 to 240 volts
Power consumption
5mA standby, 45mA under load
Internal Battery Life
Up to 3 years.  (CR2032)
Load terminals
One Normally open, One normally closed
Temperature Range
-10C to +60C Temps above or below this range could affect the accuracy of the clock but the timer will still operate.
Dimensions
4 inches by 4 inches by 2 inches including mounting tabs and terminal strip.  6 oz.
Limited Warranty
One year on materials and workmanship
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application